Autentificare

Ce căutaţi?

Introducere termen de căutare

Ne pare rău!

Nu a fost găsit niciun rezultat al căutării.

Logare

Aţi uitat parola?

Sunteţi client nou?

Înregistraţi-vă şi bucuraţi-vă de multe avantaje:

Verificarea disponibilităţii produsului
Comandare suplimentară rapidă & istoricul comenzilor
Recomandări personale ale produsului
Plată cu factură
Înregistraţi-vă acum

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
Întrebări frecvente

BV 20-25

Disp. îndoit ţeavă Dex.ţv. 20-25
BV20-25

The product image may differ

BV20-25 BV20-25
BV20-25 BV20-25 BV20-25
For tube outside Ø mm
20 - 25 
Packaging
in the box 
Descărcare PDF

Vă rugăm să alegeţi un model

Afişare tabel articole

Articol

BV 20-25
Afişarea preţului pentru clienţi, după logare.
Înregistraţi-vă acum pentru a putea avea acces la magazinul nostru online.

Register now and access our complete product range and many exclusive services.

Autentificare / înregistrare Serviciul nostru pentru Clienţi: +49-421-48907-766
Detalii produs la

BV 20-25

For tube outside Ø mm
20 - 25
Packaging
in the box

Caracteristici

Culoarea
  • argint 
Execuţie
  • manual 
Fixare
  • In vice 
Material
  • oțel 
Tip constructiv
  • Dispozitiv de îndoit ţeavă 20 - 25 
Tip constructiv - element suplimentar
  • ohne Verlängerung 
Numărul de tarif vamal
  • 84622998 
Toate caracteristicile

Descrierea produsului

Indicaţii
Please note that a good bending quality can only be achieved if the tube being bent is also made of a flexible material.
The HANSA-FLEX tubes made of steel and stainless steel from our online shop and branches fulfil these characteristics.
Descriere
This robust tube bending equipment is designed for use either in the workshop or during service calls and can be used to precisely bend flexible hydraulic tubes.
The bending lever (with two pins) and the extension piece can be used to bend the tube segment into the desired shape quickly and easily.
Ovalisation of the cross-section of the tube is reduced by the contour clamp in the bending segment.
The bend radius of the segments are: r = 86.5 mm, x = 52 mm.
Application
The tube bending tool can be used wherever a defective pipe cannot or may not be replaced with a hydraulic hose.
If a pipe was previously fitted, a hydraulic hose should only be installed as a temporary solution.
If the bent pipe is professionally installed, it will remain in the position it is fitted.
The bending equipment can be used in the construction, agriculture and forestry sectors, as well as for municipal technology and service and maintenance work.
Conţinutul livrării
A fixing hook that serves as a pipe stop
Three bending segments 20, 22, 25 mm with holding pins for insertion into a vice
A bending lever with pressure roller (without extension)

Product variants

1 Result
Search
Afişare desen la cotă
Denumire
For tube outside Ø mm
Packaging
Preţ / items
BV 20-25
20 - 25 
in the box 
Autentificaţi-vă pentru a vizualiza preţurile

Column selection

For tube outside Ø mm
Packaging